Electric Showers
 Most
electric showers draw water direct from a cold mains supply
and only heat the water as it is used. This makes them very economical, giving instantaneous showering, even
in the summer when you may not have stored hot water.
Electric showers can be installed into homes where there
is not a stored hot water supply and such flexibility means
that they can be fitted into most domestic situations.
This stylish range of electric showers offer a selection
of power ratings, starting with a basic, low cost unit, to
a high performance model. If you prefer a more powerful shower,
simply choose a higher kilowatt rating for a greater flow
rate.
NT 7.8, 8.5, 9.5 10.4kW
 |
Unique swivel elbow pipe
connection, allowing plumbing to enter shower from left
or right hand side. Ideal for retrofit installations as
often no extra plumbing is required. |
|
Indicator lights to show
low incoming water pressure and when the selected temperature
is too high to allow sufficient water flow through the
heating elements. |
|
Phased shut-down safety
feature – the shower will continue to run on for
a few seconds after being switched off. This flushes out
excess hot water from the shower and reduces limescale
build-up inside the unit. |
|
Separate temperature control
to ensure that your next visit to the shower needs no
further adjustment. |
|
Temperature stabilisation
to minimise temperature fluctuation when other taps are
opened. |
|
Luxury three spray handset
with Rub-clean feature. |
|
New-style riser rail that
fits flush to wall, with integrated hose retainer and
soap tray. |
|
Available in 7.5, 8.5, 9.5,
10.4kW rating. |
|
Available in all white or
Matt chrome effect finish. |
|
